Construction Timber
Construction materials are prepared in different sizes - width, thickness and length, some of them are processed by drying, planing and impregnation. We offer:
- freshly sawn materials that have not been processed,
- dried lumber with 18% moisture
- dried, planed timber, C16 and C24 quality
Wide range of sizes available. Choose the quality and parameters you need!
Unplaned, unsorted lumber. We offer undried or dried options.
C16 and C24 quality, certified timber for construction
Thickness 45mm - Planed Spruce
Description
Spruce Timber Thickness 45mm
Choose quality, width and length!
Dried, planed timber with two certified qualities available - C24 and C16.
C24 is a certified timber that has the highest possible quality and has greater resistance to loads and wider spans. It is used mainly for structures. It is characterized by:
- few branches, the quantity and size of which are not important;
- without fallen branches;
- cracks with a length not exceeding 50 mm are allowed, provided that they do not pass completely through.
C16 is a certified timber intended for auxiliary structures as its load-bearing capacity is much lower than that of C24 quality timber. It is used for auxiliary structures. It is characterized by:
- branches without limits;
- fallen branches without limitation;
- cracks up to 300 mm in length are allowed;
- the boards may be slightly crooked or twisted;
- resin openings (without limited sizes).
Thickness 73mm - Planed Spruce
Description
Spruce Timber Thickness 73mm
Choose quality, width and length!
Dried, planed timber with two certified qualities available - C24 and C16.
C24 is a certified timber that has the highest possible quality and has greater resistance to loads and wider spans. It is used mainly for structures. It is characterized by:
- few branches, the quantity and size of which are not important;
- without fallen branches;
- cracks with a length not exceeding 50 mm are allowed, provided that they do not pass completely through.
C16 is a certified timber intended for auxiliary structures, as its load-bearing capacity is much lower than that of C24 quality timber. It is used for auxiliary structures. It is characterized by:
- branches without limits;
- fallen branches without limitation;
- cracks up to 300 mm in length are allowed;
- the boards may be slightly crooked or twisted;
- resin openings (without limited sizes).
Thickness 95mm - Planed Spruce
Description
Spruce Timber Thickness 95mm
Choose quality, width and length!
Dried, planed timber with two certified qualities available - C24 and C16.
C24 is a certified timber that has the highest possible quality and has greater resistance to loads and wider spans. It is used mainly for structures. It is characterized by:
- few branches, the quantity and size of which are not important;
- without fallen branches;
- cracks with a length not exceeding 50 mm are allowed, provided that they do not pass completely through.
C16 is a certified timber intended for auxiliary structures, as its load-bearing capacity is much lower than that of C24 quality timber. It is used for auxiliary structures. It is characterized by:
- branches without limits;
- fallen branches without limitation;
- cracks up to 300 mm in length are allowed;
- the boards may be slightly crooked or twisted;
- resin openings (without limited sizes).
Thickness 145mm - Planed Spruce
Description
Spruce Timber Thickness 145mm
Choose quality, width and length!
Dried, planed timber with two certified qualities available - C24 and C16.
C24 is a certified timber that has the highest possible quality and has greater resistance to loads and wider spans. It is used mainly for structures. It is characterized by:
- few branches, the quantity and size of which are not important;
- without fallen branches;
- cracks with a length not exceeding 50 mm are allowed, provided that they do not pass completely through.
C16 is a certified timber intended for auxiliary structures, as its load-bearing capacity is much lower than that of C24 quality timber. It is used for auxiliary structures. It is characterized by:
- branches without limits;
- fallen branches without limitation;
- cracks up to 300 mm in length are allowed;
- the boards may be slightly crooked or twisted;
- resin openings (without limited sizes).
Would you like to receive a price offer from us?
Fill out this form and we will contact you as soon as possible!